s/v TWIG

Saga 43 - Hull #39

Emergency

  1. Distress Calls
  2. Fire
  3. Steering
  4. Demasting - Releasing Rigging
  5. Abandon Ship
  6. Person Overboard Procedure
  7. Flooding

Floatplan

  1. 210613 BM-SGE to PT-HOR
  2. 210821 PT-PDL to PT-CAS

Orientation

  1. Specs
  2. Equipment List
  3. Construction
  4. Rigging
  5. Sails
  6. Deck Gear
  7. Propulsion
  8. Propane System
  9. Thru Hulls (Seacocks)
  10. Plumbing
  11. Reverse Osmosis (RO) Water Maker
  12. Electrical
  13. Navigation Lights
  14. Electronics
  15. Safety Equipment
  16. Maintenance
  17. Commissioning
  18. Heating & AC
  19. Dinghy

Procedures

  1. Departure Checklist
  2. Raising Sails
  3. Daily Schedule
  4. Standing Orders
  5. Heavy Weather
  6. Lowering Sails
  7. Arrival Checklist
  8. Dinghy Checks & Procedures
  9. Garbage Disposal
  10. Storage

Storage

  • Raise line on spin halyard and wrap around furled headsails.
  • Carabiner roller fulers so they can’t unfurl.
  • Zip up sail bag
  • Make boom stationary. Tie off to one side.
  • Turn off water heater.
  • Turn off Water UV Lamp
  • Turn off propane valve on tanks in propane locker.
  • Close thruhull under galley/kitchen sink.
  • Close bronze heat thruhull under forward berth.
  • Cover hatches with cloth covers.
  • Flush main head with two buckets of fresh water.
  • Close main head discharge and intake thruhulls.
  • Mount outboard onto railing.
  • Flush outboard with freshwater.
  • Turn on dehumidifier for 50-55% Humidity. 45% is too low.
  • Open closet doors, left side of cabinet under galley sink, bottom lockers on either side of oven.
  • Settee cushions: move so they are open to ventilation underneath and lift cover to storage near water tanks/under settees
  • Wrap tie around mainsail and pack.
  • Leave AIS on (usually)
edit